The PVS-7 is perfect for observation and surveillance. It can be head
mounted, helmet mounted or just handheld. Utilizing one tube is
extremely cost efficient while still using both eyes.
This makes the PVS-7 a long time proven night vision system for a
various amount of uses. It shares the compatibility to all objective
lens accessories with the PVS14 such as magnification lenses
The PVS-7 is a hand-held, head mounted or helmet mounted night vision system that enables walking, driving, weapon firing, short-range surveillance, map reading, vehicle maintenance and administering first aid in both moonlight and starlight. Each unit allows for vertical adjustment (by using head straps), fore-and-aft adjustment, objective lens focus, eyepiece focus and eye span distance adjustment. The goggle is also equipped with an infrared light-emitting diode (LED) and a low battery indicator. The goggle automatically shuts off when disconnected from the head mount. There is also a high light cutoff feature that shuts off power to the goggle when it is exposed to high levels of light for 70 (± 30) seconds.
|Range of Focus
||0.25 m to 8
||+2 to -6 dpt
||Yes (in FOV)
|Low Battery Indicator
||Yes (in FOV)
||1m for 30 minutes
||148 x 79 x 155 mm
Major Component Description:
A.Goggle Assembly. The goggle assembly consists of four primary sub-assemblies; a simple objective lens, a wired housing assembly,an image intensifier assembly (not shown) and a rear cover assembly.The AN/PVS-7B contains an image intensifier. The AN/PVS-7D contains an image intensifier. The wired housing assembly contains a built-in battery compartment, attached battery cap and theRESET/OFF-ON-IR/PULL switch.
B.Head mount Assembly. The adjustable, cushioned head mountassembly secures the goggle to the operator’s head for night viewing providing freehand support for use with a weapon, protective mask or other purposes. The thin brow pad (used for larger heads) comes attached to the head mount and the thick or medium brow pads (forsmaller heads) are stored in the carrying case.
C.Carrying Case. The canvas carrying case is provided fortransportation and protection of the PVS-7, head mount assembly,batteries and accessories. Two ALICE clips are provided for beltattachment. A carrying case strap is also provided which can be attached to the two D-rings on the back of the carrying case. Thecase has a zipper closure.
D.Demist Shields. The two demist shields are used to prevent the eye- piece lenses from becoming fogged.
E. Sacrificial Window. A replaceable sacrificial window is supplied toprotect the objective lens during operation in adverse conditions.
In the Box
- Goggle Assembly ea 1
- Lens Cap ea 1
- Neck Cord ea 1
- Demist Shield ea 2
- Sacrificial Window ea 1
- Head Mount Assembly ea 1
- Browpad Thin ea 1
- Browpad Medium ea 1
- Browpad Thick ea 1
- Battery, Alkaline, AA 1.5V ea 2
- Paper, Lens Cleaning pk 1
- Manual, Operator’s ea Digital
- Strap, Case Carrying ea 1
- Case, Soft Carrying ea 1
- Eyecup Assembly ea