DJI Inspire 1 v2.1 Quadcopter with 4K Camera and 3-Axis Gimbal

What's New for v2?

Zenmuse X5/X5R Compatibility

In addition to the included Zenmuse X3, this version of the Inspire 1 also works with the Zenmuse X5 and X5R gimbal cameras (available separately)

New Propulsion System

With the new 3510H motor, the thrust sees a boost. This yields an increase in the motor velocity constant from 350 Kv to 420 Kv. In practice, this translates into better control, especially when using a Zenmuse X5 series gimbal camera

Redesigned Propellers

To go with the 3510H motors, new propellers and a new propeller mounting system have been introduced. They employ an updated mounting system, designed to make attaching and removing the propellers easier than ever before

What Ready-to-Fly Means

This Inspire 1 bundle comes ready-to-fly (RTF). This means a pre-bound transmitter (radio controller) is included and that no major assembly is required – in particular, no assembly that requires soldering. It is important – as with any multi-rotor – to follow the user guide to ensure proper calibration before embarking on your first flight

Integrated 4K Camera

4K and HD Video Capture

The Inspire 1 Camera shoots 4K video at 24p and 30p, and it can shoot HD video frame rates from 24p to 60p. It features a 1/2.3" CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis

3-Axis Gimbal

The camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter

Live HD View

A real-time feed from the Inspire 1 Camera can be displayed in 720p HD on a mobile device or HDMI monitor, making this it a great choice for FPV (first-person view) flying as well as enabling videographers and photographers to monitor framing from the ground. This is made possible by the inclusion of the DJI Lightbridge system within the flight electronics, which features a range of up to 1.2 miles

For connecting an FPV monitor or glasses there is an HDMI port on the transmitter. Plus there is a USB port to keep you mobile device's battery topped up. And included mount allows you to attach a smartphone or tablet directly to the transmitter

Modular Gimbal and Camera

Inspire 1's gimbal and camera can be removed from the aircraft for safe transport and future upgrades

Airframe Design

Retractable Carbon Fiber Arms

The prop arms rest in a lowered position when the Inspire is on the ground, acting as landing gear. Once in the air, they can be retracted to give the camera unobstructed views across 360-degrees. Carbon fiber is used in the construction because of its high strength to weight ratio

Aerodynamic Design

Not only does it give the Inspire 1 a sleek look, the aerodynamic airframe helps reduce resistance for better performance and increased battery life

Flight Control System

Fly Indoors and Without GPS

DJI's Optical Flow technology uses a specially designed camera as well as sonic waves to provide the same stability function indoors as GPS does outdoors. This technology allows the Inspire to hold its location, stop when the controls are released, and quickly respond to pilot commands even when GPS is unavailable

App-Based Control Software

Everything from manual camera controls to flight telemetry – even auto takeoff and landing – can be accessed via the Inspire 1 Mobile app. It is also possible to create autopilot courses using waypoints, just as you would on the DJI iPad Ground Station System

Note: The tablet must be connected to the transmitter via USB, and to use the waypoint map an Internet connection is required

Manual Mode

Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you want

Live Map and Radar

See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed, and shows your most recent flight path

Dynamic Home Point

When GPS signal is available on the transmitter (remote control), the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point function

Auto-Takeoff and Landing

Takeoff and landing are available with just a tap. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto land

Transmitter Customization

Put yourself in charge by tailoring the Inspire 1's controls to your personal needs. This way, your Inspire 1 moves and responds in ways you're most comfortable with

Transmitter (Radio Controller)

Take control of your Inspire 1 in the air with a dedicated transmitter (radio controller) designed specifically for it. Operating on 2.4 GHz, it features dedicated buttons for photo and video capture, a gimbal control dial, and more. It includes an integrated 6000mAh rechargeable battery

Use Two Transmitters

For an even greater level of precision, use a second transmitter and fly with a friend. With two people controlling the same quadcopter, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-time

Smart Battery System

Smart Power Management

The flight battery constantly supplies the flight computer with remaining voltage. Using special algorithms the computer supplies the pilot with estimates of remaining flying distance and time to return home

Automated Charging

The battery tracks the voltage of each cell, the total number of charges and discharges, and the overall health and battery status

Performance
Hovering Accuracy (GPS Mode)	Vertical: 1.6' / 0.5 m Horizontal: 8.2' / 2.5 m
Maximum Angular Velocity	Pitch: 300°/s Yaw: 150°/s
Maximum Tilt Angle	35°/s
Maximum Ascent/Descent Speed	Ascent: 16.4 fps / 5 m/s Descent: 13.1 fps / 4 m/s
Maximum Speed	72.2 fps / 22 m/s (Attitude mode; no wind)
Maximum Flight Altitude	14,764' / 4,500 m
Maximum Wind Speed Resistance	32.8 fps / 10 m/s
Maximum Flight Time	With Zenmuse X3: Up to 18 minutes With Zenmuse X5/X5R: Up to 15 minutes

Camera
Model	Name: X3 Designation: FC350
Sensor	Sony EXMOR 1/2.3" CMOS
Resolution	12.0 MP
Lens	Field of View: 94° Focal Length (35 mm Equivalent): 20 mm Aperture: f/2.8 Design: 9 elements in 9 groups; aspherical lens element Filters: Anti-distortion filter; UV filter
Video Recording	UHD (4K): 4096 x 2160: 24p, 25p 3840 x 2160: 24p, 25p, 30p FHD (1080p): 1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60p HD (720p): 1280 x 720: 24p, 25p, 30p, 48p, 50p, 60p Maximum Bitrate: 60 Mbp/s
File Format	Photo: JPEG, DNG Video: MP4 in a .MOV wrapper (MPEG-4 AVC/H.264)
Recording Media	Type: microSD/SDHC/SDXC up to 64 GB Speed: Class 10 or faster Format: FAT32/exFAT
Photography Modes	Single shot Burst: 3, 5, 7 frames per second (AEB: 3/5 frames per second; 0.7 EV bias) Time-lapse
Operating Temperature	32 to 104°F / 0 to 40°C

Gimbal
Model	Zenmuse X3
Number of Axes	3-axis
Control Accuracy	±0.03°
Maximum Controlled Rotation Speed	Pitch: 120°/s Pan: 180°/s
Controlled Rotation Range	Pitch: -90° to +30° Pan: ±330°
Angular Vibration Range	±0.03°
Output Power	Static: 9 W In Motion: 11 W
Operational Current	Static: 750 mA In Motion: 900 mA
Mounting	Detachable

Flight Controller
Indoor Hovering	Enabled by default
Optical Sensor (Optical Flow)	Frequency: 50 Hz Velocity Range: Below 26.2 fps / 8 m/s (6.6' / 2 m above the ground) Altitude Range: 2 to 196.8" / 5 to 500 cm Operating Environment: Rich pattern surface with adequate lighting (> 15 lux) Operating Range: 0 to 8.2' / 0 to 2.5 m

Motor
Model	DJI 3510H
Motor Velocity Constant	420 Kv
Maximum Thrust	4.8 lb / 2200 g at 25 V and sea level
Weight	3.8 oz / 107 g

Propeller
Model	DJI 1345

Transmitter
Operating Frequency	Transmitter to Transmitter: 5.728 to 5.850 GHz Transmitter to Aircraft: 2.400 to 2.483 GHz
Range	Line-of-Sight: Up to 6561.7' / 2000 m
Receive Sensitivity	1% PER:-93 dBm
EIRP	10 dBm at 900 MHz; 8 dBm at 5.8 GHz; 20 dBm at 2.4 GHz
Connectivity	1 x USB type A female (for connecting mobile device) 1 x Micro-USB for firmware updates 1 x Mini-HDMI video output for FPV 1 x CAN-Bus port (for future accessory)
Dual User Capability	Host-and-slave connection
Mobile Device Holder	Tablet or smartphone
Output Power	9 W
Power Requirements	1.2 A at 7.4 VDC
Battery	6S LiPo; 6000 mAh
Charging Temperature	Less than 3 Months: -4 to 113°F / -20 to 45°C More than Three Months: 72 to 82°F / 22 to 28°C
Storage Temperature	Less than 3 Months: -4 to 113°F / -20 to 45°C More than 3 Months: 72 to 82°F / 22 to 28°C
Mobile Device Holder	Device Width: 2 to 6.7" / 5 to 17 cm

Flight Battery
Model	TB47
Voltage	6S LiPo; 22.2 VDC
Capacity	4500 mAh / 99.9 Wh
Maximum Charging Power	180 W
Operating Temperature	-4 to 104°F / -20 to 40°C
Storage Temperature	-4 to 113°F / -20 to 45°C 72 to 82°F / 22 to 28°C
Charging Temperature	32 to 104°F / 0 to 40°C
Weight	1.3 lb / 570 g

Charger
Model	A14-100P1A
Voltage	26.3 VDC
Output Power	100 W

Mobile App
System Requirements	iOS: 7.1 or later Android: 4.1.2 or later Note: The device must be connected to a transmitter via USB (wireless linking is not supporting). Additionally, waypoint navigation requires an active Internet connection in order to load the maps

General
Model	Aircraft: T600
Operating Temperature	14 to 104°F / -10 to 40°C
Dimensions	Diagonal Distance: Landing Gear Lowered: 22" / 559 mm Landing Gear Raised: 22.9" / 581 mm Overall Dimensions: 17.2 x 17.8 x 11.9" / 438 x 451 x 301 mm Transit Case: Exterior: 22.4 x 19.7 x 10.6" / 57 x 50 x 27 cm
Weight	With Battery: 6.5 lb / 2.9 kg