GSCI TI-GEAR C Series Weapon Clip-On Sights for use with Daytime Optics

Description
Customer Reviews

Looking to add thermal vision capability to your favorite day-vision hunting scope? Then say hello to GSCI's newest thermal devices, the TI-GEAR-C345 and TI-GEAR-C675 Clip-On Thermal Imaging Scopes.

Simply clip a TI-GEAR-C345 onto your day scope's bell to convert it into a thermal imaging monster with a detection range exceeding a mile. Need even more imaging power? Then step up to the TI-GEAR-C675 and double that range to over 2-miles.

Either way it takes less than 10 seconds to transform any day scope into a high speed, high resolution thermal imaging beast that dominates any weather condition, day or night, through smoke, haze, fog and even light rain.

From the moment you clip your TI-GEAR on, expect to see incredibly vivid thermal views through your day scope. Fast moving targets are no match for the unit's high speed 50Hz thermal core, and whether your image is rendered through the TI-GEAR-C345's 384x288 pixel thermal engine or the TI-GEAR-C675's massive 640x480 pixel core, you'll enjoy incredibly sharp, high resolution thermal imagery.

And no worries about having to change your shooting position. These ultra-compact clip-ons barely change your weapon's balance. Aside from your new thermal imaging view everything else you love about your current scope stays the same - the same reticles, the same controls, the same zero.

To deliver the best possible image under any condition both systems feature shutterless thermal engines that provide with automatic Non-Uniformity Correction. Whereas lesser thermal imagers may have to be thermal cycled on a regular basis (turned off and on) to prevent image degradation, TI-GEAR systems feature sophisticated image-processing algorithms that eliminate the need for NUC cycling.

Built with full-sized, 0.6-inch AMOLED screens, both TI-GEAR versions generate intensely rich on-screen renderings. And even more good news? Powered by a pair of standard AA batteries removes the need to stock up on expensive, proprietary battery packs. Indeed even external power can be easily supplied from standard 12VDC car accessory outlets or any inexpensive off-the-shelf cell phone power bank.

Easily connect to any day scope
Simply measure of your day scope's lens bell and select the appropriate bell size when you place your order. It couldn't be simpler!

Tough Performer

Contained in a hard annodized, aircraft alluminum housing and built to IP66 envionmental standards, your TI-GEAR's internal components are robustly protected from shocks, water and dust.

Covered by an industry leading 7-year warranty, GSCI's Export-ready and ITAR-free TI-GEAR-C345 and TI-GEAR-C675 Clip-On Thermal Imaging Scopes represent solid investments that are built to last.

ITAR-free Export Sales
Because TI-GEAR Clip-On Thermal Imagers contain no U.S. components, technology or data, the export, re-export or re-transfer of this item is not subject to US Department of State, Directorate of Defense Trade Controls approval. Even so, as a Canadian-made product this unit is subject to the Government of Canada's Controlled Goods Program export licensing process as administered by Public Works and Government Services Canada.

Product Highlights
- Same Great Quality in a more Cost Effective Lineup
- Fully Canadian Made, ITAR-free and Easy to Esport
- Compact and Lightweight All-Aluminium Enclosure
- Crisp and Clear View with High Situational Awareness
- A Full Suite of tactical Assistance Features
- Withstands Harsh Mission Conditions
- Fast and High QualityGermanium Lenses
- Full-size Colour AMOLED Display
- Auto-NUC, Shutterless Thermal Detectors for a Continuous, Smooth Image
- Built-In Eye-Safe Laser for Target Designation
- Best in Class Battery Life
- Precision Built, Shock- and Water-Proof Design

Fully Canadian Made, Same great Quality/Cost Effective ITAR-free and Easy to Export

Pairing to Daytime Optics

On-Rail

On-Scope Direct: via Dayscope's Thread (M52x0.75)*

On-Scope via Quick Release Adapter ("Clamp")*

* Except 100mm models

Specifications

Objective Lenses: 25, 35, 45, 50, 75mm
FPA Resolution: 384x288 and 640x480
FPA Type: Uncooled, a-Si, Shutterless, Silent, Auto-NUC (Uninterrupted Operation)
FPA Sensitivity: <60mK
FPA Pitch: 17 microns
FPA Refresh Rate: 50Hz
Digital Zoom: Up to 8X
Display: Full-Size: 0.6'', AMOLED, 800x600, Colour
Imaging Modes: 1 Monochrome and 8 Colour
Electronic Reticles: Optional
Digital Video Recorder: Optional: External with SD Card
Power Source: 2 pcs CR123 Batteries
Battery Life: Up to 7 hours
Accepted Power Sources: 5V USB Power Banks, External Power Supply (4V .. 15V)
Environmental Protection: IP66 or Better (Optional)
Operating Temperature: -40°C .. +50°C
Warranty: 7 Years, Limited
Export: Available Worldwide *

Recoil Rating

All TI-GEAR-M systems are rated and tested on firearms of up to and including .50 cal.
The small rifle mount (DQRM) is recommended for engagements only on firearms of up to and including .300 / 7.62mm.

UNCOMPROMISED PERFORMANCE

Shutterless Sensor with Automatic Calibration
Full Size Colour AMOLED Display
50Hz Refresh Rate for Smooth Image

QUALITY AND DEPENDABILITY

Thorough Testing and Inspection of All Parts
All-Aluminum Body
Fully Dust- and Waterproof

PEACE OF MIND

7 Hours of Battery Life
Accepts Multiple Power Sources
Manufacturer's Warranty

Available in C345 or C675

TI-GEAR-C345
- Field of View: 8.3°x6.2°
- FPA Resolution: 384x288
- Digital zoom: 1X, 2X, 4X
TI-GEAR-C675
- Field of View: 13.8°x10.4°
- FPA Resolution: 640x480
- Digital zoom: 1X, 2X, 4X, 8X

Included: Video-out cable, USB power cable, Soft pouch, Hard case, User’s manual, Quick reference Card and Warranty form.

FIREARM MOUNTING SOLUTIONS FOR TI-GEAR THERMAL SYSTEMS

WHY CHOOSE THE TI-GEAR?

Full Size 0.6-inch Display for Best Image Quality

Smaller size displays used in other systems require their eyepieces to have higher optical magnification which results in optical distortions when image is viewed under different angles. Operator's head/eyes need to be strictly in one position and under one angle to comfortably see the image.
Unlike other systems, TI-GEAR features the full-size 0.6-inch AMOLED display which requires minimal optical magnification of the eyepiece, has longer eyerelief and produces a larger exit pupil which results in virtually no optical image distortion or blurring of the image as the operator slightly moves the line of vision either closer, up or down, or left or right.
TI-GEAR Advantages:
Image is not optically distorted or blurred
Long eyerelief and larger exit pupil for comfortable observation

Thermal Detector Requires No Calibration

TI-GEAR systems are based on high-performance FPA (thermal detectors). Apart from high resolution, sensitivity and refresh rate, the TI-GEAR's thermal detectors are shutterless, silent in operation. Non-Uniformity Correction is performed automatically, instantly and continuously.
Thanks to Auto-NUC, no operator's involvement is needed to perform sensor calibration, no buttons need to be pressed, no need to cover the objective lens, so you never miss a second.
TI-GEAR Advantages:
Image is always crisp and clear
Image never freezes or degrades over time
No operator distractions

Advanced Hardware and Software Solutions

The hardware and software of the TI-GEAR systems are designed and developed in harmony by the GSCI engineering team to ensure superior user experience.
Proprietary video image processing and other techniques implemented in TI-GEAR systems guarantee maximum sensitivity and image clarity to deliver maximum system performance yet maintaining minimal power consumption.
TI-GEAR Advantages:
Best-in-Class battery life
Unparalleled performance at all times
Can be powered by a variety of power sources

Precision Built, All-Aluminum Enclosure

TI-GEAR housings are machined out of high-grade aluminum alloy to provide added strength and rigidity. The housings then undergo hard anodizing process to ensure maximum resistance to harsh environments.
TI-GEAR Advantages:
Lightweight yet strong
Immune to corrosion
Very high shock and vibration resistance
Very high resistance to abrasives (soil, sand)

... and best of all, the TI-GEAR series have the lowest retail prices in the Industry.

GSCI TI-GEAR C Series Thermal Clip-On Sights for use with Daytime Optics

Price

Availability:

Choose Options or Accessories if Applicable

Related Items

Recently Viewed Items

Browse Similar Items