- Switch over among five scence modes by one button, truly realizing all-weather environment self-adaptation
- Compact and lightweight
- OLED color eyepiece display, capable of displaying images in various color modes
- Encapsulation IP67
- Super sound-off and bright light Cut-off System, prevent exposure
- Optional Bluetooth remote controller for easy operation
- Quick mount and no-shot zero (recommanded magnification of the day scope/sight : 2-4X)
TA435 helps to transform optic sight into a night vision sight, no re-zeroing required, easy to use, excellent imaging, compact and lightweight, durable, suitable to various environments.
Providing excellent night time performance to most demanding wild life enthusiasts, paintball/airsoft/sports enthusiast, varmint hunter, law enforcement, or security personnel.
The Guide TA435 attachment revolutionizes the application of thermal imaging technology. Thermal imaging has never been so small and powerful at the same time. The thermal imaging device can be used as a multifunctional observation device (including the Viewfinder), which can be attached as a stand-alone or clip-on device to spotting scopes, binoculars, DSLR cameras or camcorders. In some federal states, this device can be used as an attachment in front of riflescopes, provided that a commission according to 40WaffG exists.
The TA435 guide can be used for both day and night observations, as well as under conditions where other optical devices (eg binoculars, spotting scopes, night vision devices) can no longer be used, especially under adverse environmental conditions such as fog, smoke and partially hidden vegetation Field of view such as high grass and light undergrowth as well as at Waldwinkelwiesen which are difficult to see by nocturnal shadow.
Discover nature with this new device and turn night into day. The high-performance sensor has a resolution of 400x300 pixels with a pixel size of 17µm and a refresh rate of 50Hz. The temperature sensitivity is 50mK @ 30 ° C. This is an extremely good value!
With a weight of only 380g and up to 4.2 times magnification, this device allows the detection of animals, humans, etc. at a distance of up to 1.9km. The detection of animals is possible at a distance of 900m and the response to 200m. The device is extremely small for a header (150x53x54mm) and has the currently best OLED screen, which was ever installed in a header. The screen has a resolution of 1024x768 pixels. For comparison, the Pulsar Core FXQ55 only has 640x480 pixels, which is less than half. Accordingly, mounting on a binocular with up to a 6-8x magnification is no problem. The image display has 5 separate modes; Black hot / white hot / red hot and green Hot.
The power is supplied via two CR123 or two rechargeable ICR16340 rechargeable batteries, while the TA435 itself can act as a charging station or the batteries are charged via an optional charger. Of course, the device is certified to IP-67 and can withstand the most adverse weather conditions. Operability is possible via the buttons, as well as via a supplied remote control, which is remotely controlled via Bluetooth.
Application Guide TA435
The thermal image scope is suitable for any user who wants to add
thermal images to their rifle scope. With the TA435 you can transform
your rifle scope into a thermal scope. You cannot use the TA435
individually as a rifle scope because the thermal imaging camera itself
does not have a reticle. Use the reticle of your rifle scope for aiming
Using the supplied eyepiece, you can also use the TA435 handheld and
look through it with your eye. You can also place the thermal imaging
camera on a tripod (optionally available) through the 1/4" thread at the
bottom. With two CR123A batteries (not included) you can use this
thermal clip-on for up to 3.5 hours. A universal battery charger is
included to charge your own batteries. If you want to view images in
real-time on a screen, you can use the included video-out cable.
|Detector Type|| 400×300 @17µm, VOx|
|Focal Length||25mm F1.1||35mm F1.2||50mm F1.2|
|OLED||Colorful 0.39 inch OLED screen 1024×768|
|Eyepiece||Monocular, Pupil Distance 10mm, Pupil Caliber 20mm|
|Auto Tracking||Hotspot track|
|Calibration||Automatic calibration/ Manual calibration (shutter) /Manual scene compensation|
|Scenes Modes||Enhanced, Highlight, Natural|
|Color Palettes||Black hot, white hot, red hot, green hot|
|Power Supply ||can be powered by 5V2A external power supply |
|Working Time||Continuous Operating over 3 [email protected]°C|
|7-Pin LEMO Interface||Support video output and external power supply |
|Humidity ||Working and storage10% ~ 95%, Non condensing|
|Certificate||RoHS Certificate/CE Certificate/FCC Certificate|
|Standard||Blinder, Carrying bag, Charger, User manual, 7-Pin Lemo to USB cable, Warranty|
|Optional||External eyepiece, Adapter ring, CR123A×2(Non-rechargeable)battery, ICR16340×2(rechargeable)battery,|
Bluetooth remote controller, Picatinny rail, Charger, Video cable (two in one, power supply & video output
In the Box
Standard: Thermal imager, user's manual, eyecup, 1 year warranty for scope, 6 months for batteries, chargers, wire and other accessories.
Optional: Adapter ring, external eyepiece, CR123A 2, ICR16340 2, charger, Bluetooth remote control, magic tape, Ramote control, video converter, Picatinny bar.