Product Highlights
- Monocular Clip-On Attachment
- For Helmet-Mount NV Binoculars
- Low-Light, Highlight, and Outline Modes
- 384 x 288 Resolution
- 17° FOV
- IP67 Waterproof
The Iray / InfiRay JerryC C2 is a Clip-On Thermal Imager (COTI) that features a high 384x288 resolution, 12um sensor with a 50Hz refresh rate. The
C2 easily attaches to existing night vision devices (NVDs) to instantly
add thermal detection capabilities by overlaying a thermal image on top
of the analog image intensified image, creating multi-spectrum
capability and removing the need to switch to a completely separate
device. The JerryC C2 provides 20 degrees of thermal overlay for increased thermal field of view. With a standard quick disconnect, the C2 interfaces to any night vision devices that also accepts PVS-14 optics, such as PVS-31A, DTNVS, Katana, RNVG, Sentinel, PVS-7, etc.
Functionally identical to the JerryC CE2, the
critical difference is the C2 has on-board power AND an outboard
battery port. However the C2 does not come with a battery pack. They can
be purchased separately.
Because the JerryC has onboard power, users wanting to use the external eyepiece adapter during
the daytime, without the need for a host night vision device, will find
this device much less cumbersome. The C2 weighs 110g compared to the
CE2's 78g. The C2 also comes with a battery extender which allows the
use of longer 18650 batteries.
NOTE: You will NOT be able to use refocus devices like the
Matbock Tarsier Eclipse or Phokus Hoplite caps when using the JerryC
devices due to the geometry of the system and how the JerryC mounts and
projects onto your objective lens.
Detailed Features & Controls
The latest version of the C2 now allows users to calibrate the
location/offset of the thermal image so that they can line up the analog
night vision and thermal images perfectly. A copy of these instructions
will be included with every C2. In addition, the C2 now "remembers" the
orientation/settings from the last time the unit was on, even with the
power disconnected. Users are also able to adjust brightness, contrast,
and threshold.
The C2 has two main controls: a button and a multi-function dial. By
default, the multi-function dial turns the unit on and controls gain.
The C2 has 3 main display modes: full thermal, highlight, and outline.
These are easily accessed by depressing the multi-function dial. Pulse
Mode is accessed by clicking the button on the rear of the unit, once in
Pulse mode, the frequency of the pulse can be controlled by the dial.
Pulse mode is a mode that gently flashes the thermal image on and off,
especially useful to differentiate between high light areas of the
analog image and thermal signatures. Long-pressing the button will
display the menu.
Specifications
Sensor |
384x288, 12um pixel pitch |
Detection Range |
>1000m |
Field of View |
20 degrees |
Optical zoom |
1x |
Display Modes |
White Hot, Highlight, Outline |
Weight |
78g |
Waterproof |
IP67 |
Operating Temperature |
-40°C to + 60°C |