The image it produces is very nice and the wider 30.5º FOV is much
better than the small 20º FOV of the PAS-29 COTI. One thing we noticed
with the Jerry-C is the contrast is much better.
Product Highlights
-
Sensor 640 x 512, 12um pixel pitch
-
Detection Range >1000m
-
Field of View 30.5 degrees
-
Optical zoom 1x
- Allow for
image alignment. visual modes: Outline, Patrol, and Full
Thermal
- Works with PVS-14, PVS-31, DTNVS, Katana, RNVG, Sentinel, PVS-7, etc.
-
Weight 78g
-
Waterproof IP67
-
Operating Temperature -40°C to + 60°C
An
infrared thermal imaging enhancement attachment, designed for the rapid
upgrade, front-fusion, and multi-mode display of the equipment in
service.
As
a branch of ENVG (enhanced night vision goggle) products, Jerry-C
Clip-on Thermal Imager can project long-wave thermal infrared images
into the view of the I2 and
low-illumination night vision devices to directly realize thermal
fusion without adjustment. This improves the search efficiency under
complicated conditions and the perception capability under extreme
low-illumination conditions (such as sandstorm, basement, cave, and
abandoned houses).
The existing night vision devices can be upgraded to the thermal fusion type by using the clip-on fusion function without replacing them, greatly reducing the use cost of equipment.
The iRay Jerry C5 is a Clip-On Thermal Imager that features a high
640x512 resolution, 12um sensor with a 50Hz refresh rate. Functionally
identical to Jerry CE5,
the critical difference is the C5 has on-board power AND an outboard
battery port. However the C5 does not come with a battery pack.
The C5 easily attaches to existing night vision devices (NVDs)
to instantly add thermal detection capabilities by overlaying a thermal
image on top of the analog image intensified image, creating
multi-spectrum capability and removing the need to switch to a
completely separate device. Unlike legacy clip-on thermal
devices, the Jerry C5 provides over 30 degrees of thermal overlay for
increased themal field of view. With a standard quick disconnect, the C5 interfaces to any night vision devices that also accepts PVS-14 optics, such as DTNVS, Katana, RNVG, Sentinel, PVS-7, etc.
Because the JerryC has onboard power, users wanting to use the external eyepiece adapter during
the daytime, without the need for a host night vision device, will find
this device much less cumbersome. The C5 weighs 110g compared to the
CE5's 78g. The C5 also comes with a battery extender which allows the
use of longer 18650 batteries.
NOTE: You will NOT be able to use refocus devices like the
Matbock Tarsier Eclipse or Phokus Hoplite caps when using the JerryC
devices due to the geometry of the system and how the JerryC mounts and
projects onto your objective lens.
The latest version of the C55 now allows users to calibrate the
location/offset of the thermal image so that they can line up the analog
night vision and thermal images perfectly. A copy of these instructions
will be included with every C5. In addition, the C5 now "remembers" the
orientation/settings from the last time the unit was on, even with the
power disconnected. Users are also able to adjust brightness, contrast,
and threshold.
The C5 has two main controls: a button and a multi-function dial. By
default, the multi-function dial turns the unit on and controls gain.
The C5 has 3 main display modes: full thermal, highlight, and outline.
These are easily accessed by depressing the multi-function dial. Pulse
Mode is accessed by clicking the button on the rear of the unit, once in
Pulse mode, the frequency of the pulse can be controlled by the dial.
Pulse mode is a mode that gently flashes the thermal image on and off,
especially useful to differentiate between high light areas of the
analog image and thermal signatures. Long-pressing the button will
display the menu.
Specifications
Model
|
C5
|
C2
|
CE5
|
CE2
|
|
Infrared Specifications
|
Resolution
|
640×512
|
384×288
|
640×512
|
384×288
|
Pixel Pitch
|
12µm
|
Spectral Band
|
8~14µm
|
|
Optical Specifications
|
Lens Focal Length
|
f 11.52mm
|
FOV
|
f30.5°
|
f20°
|
f30.5°
|
f20°
|
Functions
|
Display Mode
|
White hot/Highlight/Outline
|
Display Functions
|
Normally on/Breathing
|
Brightness Adjustment
|
Support
|
Auto Brightness
|
Support
|
Shutter Correction
|
Support
|
Contrast Adjustment
|
Support
|
Threshold Adjustment
|
Support
|
Menu rollover
Chinese and English
|
Support
|
Interfaces
|
Data
|
RS232
|
Video
|
PAL
|
Power supply mode
|
17335\18650
|
External power supply (3~5.5V)
|
|
Environmental Adaption
|
Operating Temperature
|
-40°~+60°
|
IP Encapsulation
|
IP67
|
Weight
|
110g
|
78g |
In the Box
- IRay Jerry C Series Thermal Imager C5 Clip-On Monocular
- PVS-14 bracket
- Limited 2-Year Warranty