With the Mate MAL25, InfiRay is launching a new device for all forest
hunters with a large field of view, which is ideal for shorter
distances up to 150m. As a multifunctional thermal imaging device, the
Mate Clip-On series can not only be used as an attachment device, but
also as a monocular for pure wildlife observation.
- 18 mk high-end sensor with 12µm InfiRay Technology
- 384 x 288px detector with 25mm lens
- Compact design with tower focus ring
- Detection of heat sources from approx. 1300m
- High-resolution 1024x768 OLED Display
- Menu display can be adapted to the magnification of the telescopic sight
- Four different point of impact settings can be stored
The contrast sharpness and overall image quality are significantly
better than with the predecessor model CL42, making this device a real
highlight. This, in combination with the very sensitive sensor
technology with <18mk and the 12µm pixel interval, results in a much
more harmonious and clearer thermal image. In addition, this device
allows for ultra-precise adjustments in the X and Y-axis of 1.5 MOA. The
adjustability makes the device one of the most precise on the market,
with a constant hit rate of 3cm on a surface at 100m. Furthermore, it is
possible to save up to four different profiles, so that the device can
be easily used with various daylight optics at the same time.
In addition, the Mate series has some interesting optional
accessories: a rangefinder (LRF) with integrated battery, a viewfinder
with 4x magnification, and an external battery pack that can extend the
runtime by 7 hours. A real laser rangefinder is probably the missing
link in relation to attachment devices, which many hunters have been
waiting for. InfiRay has taken on the task, and now a laser rangefinder
module can be mounted directly on the Mate via a short Picatinny rail.
The LRF module is equipped with a standard 18650 battery and serves as
an external power bank for the Mate. This makes the Mate Clip-On the
strongest and best-equipped clip-on currently available on the market.
Unlike night vision devices that only work with residual light or
require an IR illuminator, the Mate MAL25 can also be used in complete
darkness. Even in poor weather conditions such as fog, rain, snow or
through patchy obstacles such as branches, high grass, bushes, heat
sources can be detected.
The MATE MAL25 has a WLAN interface with app support and can take pictures/videos of your hunting experiences.
The main control panel on the top of the Mate can now be folded out
and serves as a Bluetooth remote control, allowing all settings to be
made ergonomically and comfortably by the user.
Meet Mate Series
MATE creates a spot where precision meets portability. The magnesium
alloy housing reduces the weight by 50% and improves the precision. MATE
supports practical functions, including removable buttons, LRF, and
monocular extension. It is the ideal mate for users who want a compact
size and great value.
Lightweight & Compact Size
The weights are over 20% lighter than other similar products. It is also more compact in size than our previous clip-on.
Powerful Detector
MAL25 provide cost-effective choices without major compromise in image quality.
Distortion-free
A high-quality optical imaging system offers a distortion-free image even when used with a 10 times daytime scope.
Sense-based Algorithms
The algorithms improve image quality by setting suitable preset
parameters based on different environments, forest, plain, and city.
Removable Buttons
The buttons can be moved and installed to any position on your rifle.
This allows hunters to control the device easily even when their focus
is on the target. The remote control is supported by an ultra-low power
consumption solution and can attach magnetically for automatic charging.
Power Bank in Box
Mate Series add a power bank as a complementary accessory. It can prolong the battery life for approximately another 7 hours.
LRF Extension
LRF can be equipped as an optional accessory. In addition to
facilitating accuracy, the LRF extension can work as a power bank to
prolong the 4-hour battery life for MATE.
Detector Parameters |
Resolution, pixels | 384 × 288 |
Pixel size, um | 12 |
NETD, mk | = 30 |
Frame rate, Hz | 50 |
Optics Parameters |
Objective lens, mm | 25 |
Field of view (H x V), degrees / m @ 100 m | 10.6 × 7.9 / 18.4 × 13.8 |
Recommended magnification of the day scope, x | G1/G2/G3/G4:1 - 5 |
|
E-zoom | Attachment mode: ×1 |
Monocular mode: ×1/×2/×4 |
Detection range, m | 1298 |
(Target size: 1.7m×0.5m, P(n)=99%) |
Display Parameters |
Type | OLED |
Resolution, pixels | 1024 × 768 |
Electrical Parameters |
Battery | Built-in battery + Infiray battery Pack |
Max. battery life, h | 5 + 7.5 |
USB Interface | Type-C |
Physic Parameters |
Body Material | MagnesiumAlloy |
IP Rating | IP67 |
Remote control | Support |
Built-in memory, GB | 32 |
Aim point, MOA | 1.5 |
Weight, g | 460 |
Dimension, mm | 132 × 62 × 68 |
Adapter Ring | M52×0.75 |
WARRANTY INFO: Standard 2-year warranty from Infiray Canada
In the Box
- InfiRay Mate MAL25
- Remote control (a CR2032 is required here, this is not included)
- Clip-On adapters
- assembly key
- Microfasertuch
- Protective bag
- USB charging plug
- Heat pads / target pads (10 pieces)
InfiRay Mate clip-on devices specs comparison
Model:
| InfiRay MATE MAL25 | InfiRay MATE MAL38 | InfiRay MATE MAH50 |
|
|
|
|
Thermal Sensor Resolution:
| 384x288 px | 640x512 px |
Pitch:
| 12 µm |
NETD Value:
| = 30 mK | = 25mK |
Frame Rate:
| 50 Hz |
Lens:
| 25 mm | 38 mm | 50 mm |
Magnification:
| 2.5-10x | 3.7-14,8x | 3-12x |
Field of View (at 100m):
| 18 m | 12 m | 16 m |
Max. Detection Range:
| 1,298 m | 1,948 m | 2,597 m |
Recognition Range:
| 216 m | 324 m | 432 m |
Display:
| OLED 1024x768 px
|
Max. Operating Time:
| 4.5 h (+7.5 h with optional battery kit )
| 4 h (+6 h with optional battery kit)
|
Dimensions (mm):
| 132x62x68 | 138x62x71 | 146 x 62 x 73 |
Weight:
| 460 g | 520 g | 530 g |