Trijicon AccuPoint 3-9x40 Series Riflescope

Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all.

Trigicon's triumphant performance on battlefields across the globe translates to your success on the hunting field. The AccuPoint 3-9x40 Riflescope sports a venerable variable magnification range that delivers the flexibility to sight in dense brush or across open fields with ease. Sighting during twilight conditions is enhanced considerably by a notable 40mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions.

A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation.

Mil-Spec Finish

Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective

Multi-Layer Coated Lenses

Provide superior clarity, zero distortion, flare/glare reduction

Fiber Optics and Tritium Illumination

Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries

Dual-Illuminated Green Mil-Dot Reticle

The Mil-Dot reticle enables long range distance calculations. A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement.
Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia.
This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. The scope must be set to 9x magnification to use the Mil-Dot system